Single Mode SC WDM Single Fiber Mini Size DIN Rail Mount Industrial Type-Universal Gigabit Ethernet 1000Base-FX & Fast Ethernet 100Base-FX 每 Fiber Media Converter 每 UTP Port Auto Sensing 10/100/1000Mbps, up to 20km (12.42mi) 每 Set 1 Pair
Single Mode SC WDM Single Fiber Mini Size DIN Rail Mount Industrial Type-Universal Gigabit Ethernet 1000Base-FX & Fast Ethernet 100Base-FX 每 Fiber Media Converter 每 UTP Port Auto Sensing 10/100/1000Mbps, up to 20km (12.42mi) 每 Set 1 Pair Unmanaged 10/100/1000 Fast Ethernet & Gigabit Autosensing Media Converters Media Converters AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd
Quantity
Mini Type Industrial DIN rail Universal 100FX / 1000FX Ethernet Fiber Optic Media Converter. This is a new release! Small, but still with DIN rail, small, but allows you to configure 100FX and 1000FX fiber port (Yes! Fiber Optic Port is now universal). WDM SC DIN Rail Single Fiber Industrial 100FX 1000FX universal fiber optic media converter set. In this video we are testing out a pair of our new WDM type mini industrial media converters.

Description

This AD-net product is industrial-grade 1 port 10/100/1000M Ethernet to 1000Base-X fiber conversion, mainly used for long-distance 20Km transmission of optical fiber networks. This product provides 1 Gigabit optical port; 1 Gigabit Ethernet electrical port. With complete alarm function, the whole machine is stable and reliable, with low power consumption, high integration and small size.
 

Features

  • Industrial Ethernet series, designed for harsh environments˙
  • The device provides 1 Gigabit Ethernet electrical port, 1 Gigabit optical port, shared Gigabit bandwidth, transmission bandwidth is 1000M line speed, Gigabit optical port supports Single mode single fiber 20 Km distance transmission˙
  • Electrical interface (RJ45 interface) supports 10/100/1000M adaptive, full/half duplex mode, MDI / MDI-X automatic detection˙
  • Support LFP function, can transmit the alarm of the optical port to the electrical port, and can be set to open with the DIP switch˙
  • Support the configuration of optical ports 1000BASE-FX and 100BASE-FX, which can be set by DIP switch˙
  • Support to display the LINK status of the remote end optical port at the local end and display it with LED light˙
  • With functions such as broadcast storm protection, balanced traffic, isolation conflict, error detection and crash reset, it is suitable for high-flow data applications such as video transmission˙
  • Support the transmission of VLAN extra long data packets, which can be matched with the switch products supporting IEEE802.1Q protocol, MTU≥10240 ˙
  • Support wide range AC and DC input; support internal isolation˙
  • The power supply supports overload protection, anti-reverse protection˙
  • Comply with industrial level 4 electromagnetic compatibility requirements˙
  • Super lightning protection function: lightning protection, anti-induction high voltage, anti-surge, etc.˙
  • Fan-less heat dissipation, reducing repair time˙
  • IP40 enclosure protection level, able to withstand the test of harsh environments˙
  • Rail or wall mounting˙
  • Wide temperature type: working temperature -40 ºC ~ + 85 ºC


Technical indexes

Parameter

Specifications

Access mode

10/100/1000Mbps Gigabit Ethernet

Standard

IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-FX Gigabit Ethernet, IEEE802.1q VLAN

Transmission distance

Single-mode Single-fiber: 20 Km (9/125μm)

Category-5 twisted pair: 100m

Port

One RJ45 connector: connected to UTP category-5 twisted pair

One fiber port: Single-mode SC (fiber size: 9/125µm), simplex 1 fiber type only.

Typical transmit power

1310/1550nm:≥-9dBm

Receiver sensitivity

-28dBm ~ -40dBm

MTBF

100,000 hours

Power Supply

AC110-260V˙ DC-48V

Power consumption

5W

Operating temperature

-40 ~ +85ºC

Operating humidity

0%~90%

Maintaining temperature

-40 ~ +85ºC

Maintaining humidity

5% ~ 90% non-condensing

Dimensions

60* 50* 35 mm (L*W*H)



LED indicators

Name

Status

Explanation

PWR

On

Power on

Off

Power off

LSYN

On/Flash

The local optical port is connected / receives and transmits data

Off

The local optical port not connected

RSYN

On

The remote optical port is connected

Off

The remote optical port not connected (important: In case you pair this converter with other type of optical device, it will sync and work, but this LED will not come up, however, connection will be still up)

LNK

(RJ45)

On/Flash

Ethernet port connected / received and transmit data

Off

Ethernet port is not connected

SPD

(RJ45)

On

Ethernet port 1000M

Off

Ethernet port 100M


Installation

Interface

RJ-45 interface:

The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire

Fiber interface:

SC fiber interface is simplex (1 fiber strand) type, and you need thus you will need only 1 fiber to connect media converters together and still have full duplex Ethernet connection. These media converters utilize WDM – Wave Division Multiplexing technology to make full duplex Ethernet connection over 1 fiber only thus saving fiber infrastructure costs. This is why it is important to ensure, that converters are used in pairs exactly as they are packed in set – A side with 1310/1550nm wavelengths must work in pair with 1550/1310 nm B side (double check sticker right on the fiber port).

Important: DO NOT connect A side to A side or B side to B side, in this way, connection will not be established.


Connection

The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC fiber interface of the optical transceiver. Then switch on. The corresponding LED is on for correct connection. (See the table above for the LED indicator lamp)

Figure 1ㄩ Basic Network Connection

Figure 2ㄩ Front panel

Select DIP Switch

There is a 4-position DIP switch on the front panel of the device, support LFP function, and the configuration of optical ports 1000BASE-X and 100BASE-FX.

Figure 3ㄩDIP switch

1

ON

LFP-ON

OFF

LFP-OFF

2

ON

Fiber port 100BASE-FX

OFF

1000BASE-FX

3

ON

Enable Fiber Port is 1000Base-FX full/half auto – negotiation

OFF

1000Base-FX full

4

Reserved



Ordering Information
AN-UMG130-AS-20-mini-I

Mini Type Industrial 1310/1550nm IP40 rated single mode single fiber WDM media converter with configurable 100FX/1000FX fiber port and autosensing 10/100/1000 UTP port, optional power supply in set, DC 9 - 55V power input, A side

 
AN-UMG150-AS-20-mini-I

Mini Type Industrial 1550/1310nm IP40 rated single mode single fiber WDM media converter with configurable 100FX/1000FX fiber port and autosensing 10/100/1000 UTP port, optional power supply in set, DC 9 - 55V power input, B side



 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version