F-R100 3G/4G Cellular Router
F-R100 3G/4G Cellular Router 4G Industrial Router (1xWAN, 4xLAN, WIFI, 2xI/O Ports) Four-Faith Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd


  • Ethernet, serial and I/O for connecting diverse field assets

  • Maximizes uptime by seamlessly switching between the multiple Internet interfaces

  • Secure your data using a variety of VPN tunneling schemes

  • Din-Rail or wall mounting or desktop

Advanced Failover

Maximise uptime by seamlessly switching between the multiple Internet interfaces (cellular, WAN, Wi-Fi, dual-SIM)
Multiple Tunnelling Schemes

Industrial cellular router Secure your data using a variety of VPN tunnelling schemes, including IPSec, L2TP, PPTP, Open VPN and GRE
Flexible Wi-Fi

802.11 b/g/n, configurable Wi-Fi as WAN or access point, Wi-Fi Security (WEP / WPA / WPA2 Mixed Mode) and multiple SSID
Serial Port

Industrial cellular router Ethernet, serial and I/O for connecting diverse field assets
Support devices configuration, upgrade and maintenance remotely, greatly improve the efficiency of management

Four-Faith Remote Manager provides mass configuration, device management, OTA update, and troubleshooting tools and cellular router communication 3g 4g network.

M2M Applications


Industrial Four-Faith F-R100 3G 4G Cellular Router Din Rail bonding is an intelligent industrial cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution management systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting, wide operating temperature range, and IP30 metal housing, the F-R100 is a convenient yet reliable solution for any industrial wireless application.

CELLULAR WAN Supported Frequency Bands
LTE: B1, B2, B3, B4, B5, B7, B8, B20, B28
WCDMA: 2100(B1), 1900(B2), 850(B5)
EV-DO/CDMA: 800(BC0)
GSM/GPRS/EDGE: 850/900/1800/1900
Automatic SIM based network operator switching
HOST INTERFACES 10/100 Base-T RJ45 Ethernet port
RS-232 or RS-485 Serial Console Port
3 SMA antenna connectors (WI-FI and Double-cellular)
Active GPS/ZigBee antenna support (option)
(6) pin 3.5mm terminal block
INPUT/OUTPUT (6) pin 3.5mm terminal block
(2) DI, (1) DO, (1) Relay.
Input ON Voltage: 5 to 30 VDC
Input OF Voltage: 0 to 3 VDC
Output < 50mA @ 30VDC
DHCP Server
IP Passthrough (option)
Host Interface Watchdog
Modbus (ASCII, DTU, Variable)
Reverse Telnet
WI-FI IEEE802.11 b/g/n, AP and client mode.
Adjustable output power (Max: 26dBm)
Access point for up to 30 clients
Simultaneous access point/client mode
WEP, WPA-PSK, WPA2-PSK etc. Security
NETWORK AND ROUTING Network Address Translation (NAT)
Port Forwarding
Host Port Routing
Reliable Static Route
Dynamic DNS
VPN IPsec, GRE, and OPENVPN Client
Up to 10 concurrent tunnels
Split Tunnel
Dead Peer Detection (DPD)
Multiple Subnets
VPN Failover
SECURITY Remote Authentication
Inbound and Outbound Port filtering
Inbound and Outbound Trusted IP
MAC Address Filtering
PCI DSS V3.0 compatible
GPS (Option) Antenna Interface: SMA Female, 50 ohms impedance
Tracking Sensitivity: better than -144 dBm
Horizontal position accuracy: 2.5 m
Time-To-First-Fix: 29 s
Protocol: NMEA-0183 V2.3
EVENTS ENGINE (Option) Custom event triggers and reports
Configurable interface, no programming
Event Types: Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature
Report Types: RAP, SMS, Email, SNMP Trap, TCP (Binary, XML, CSV)
Event Actions: Drive Relay Output
Four-Faith MANAGEMENT SERVICE Secure cloud-based device management application
Remote provisioning
Gateway configuration and template management
Configurable monitoring and alerting
Software and radio module firmware updates
Auto configuration
Device Configuration Templates
Software and radio module firmware updates
AT Command Line Interface (Telnet/SSH/Serial)
SMS Commands (Option)
Operating Environment Operating Temperature: -35°C to +75°C / -31°F to +167°F
Storage Temperature: -40°C to 85°C / -40°F to 185°F
Humidity: 90% RH @ 60°C
DIMENSIONS Housing & Weight: Metal, **g
Dimension: (L x W x H): 133 x 115.7 x 45 mm
Installation: 34.6 mm Din-Rail or wall mounting or desktop



F-R100 3G 4G Cellular Router Din Rail bonding TECHNICAL SPECIFICATION V1.0.0.pdf Use Manual

Use Manual

FR100Declaration of Conformity

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version