HDMI Extender over cat5e/6 with IR & RS-232 ports
HDMI Extender over cat5e/6 with IR & RS-232 ports HDMI KVM Over UTP Cat5e/Cat6 Video Audio Transmission Equipment AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd
In this video we show how cables are plugged in and units get to work immediately.


HDMI extender while using CAT6 cable as transmission media. the transmission distance for 1080P reaches 100 meters. for 4K*2K reaches 70meters,support 3D transmission, the IR system could control the sources from the sinks or control the sinks from sources. Products offers solutions for digital entertainment center, HDTV retail and show site, HDTV, STB, DVD and Projector factory, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.


  • One pair as a full functional module, no need for setting
  • Use single UTP LAN cable (CAT6) to substitute HDMI cable to achieve long distance transmission
  • UTP cable termination follows the standard of IEEE-568B
  • Transmission distance reaches up to 100 meters under the video format of 1080P. 70 meters for 4k*2k
  • HDMI V1.4 supported
  • HDCP compliant
  • Full HD support: 1080p@60Hz@48 b/pixels, 3D and 4Kx2K
  • With ESD protection inside
  • Mounting ears supplied
  • Transfer Bidirectional Infrared control signal together with the HDMI signal
  • RS232 Port for firmware update or RS232 control signal transmission


Operating Temperature Range
-5 ~ +35°C
Operating Humidity Range
5 to 90 % RH (no condensation)
Input Video Signal
0.5-1.0 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Video Format Supported
Output Video
Output Audio
Support DTS-HD, Dolby-HD
Maximum Transmission Distance
1080p     CAT6 120 Meters
1080p 3D  CAT6 100 Meters
4K*2K     CAT6 70 Meters
Power Supply
5V/2A DC
Power Consumption
2.5Watts (Transmitter)  
5 Watts  (Receiver)
Mass (Main unit)  
HDMI Extender over cat5e/6 with IR & RS-232 ports


  1. Connect the HDMI input source (such as HD-DVD¡¢PS3¡¢STB etc. ) to transmitter.
  2. Connect a CAT6 cable from RJ45 port of transmitter to RJ45 port of receiver
  3. Connect the HDMI sink(such as HD-LCD¡¢HD-DLP£©to receiver
  4. Connect the IR TX UNIT into transmitter IR TX; Connect the IR RX UNIT into receiver IR RX.
  5. Connect the IR RX UNIT into transmitter IR RX; Connect the IR TX UNIT into receiver IR TX.
      Attention: Please insert and extract cables gently.

Ordering Information

HDMI Extender over cat5e/6 with IR & RS-232 ports.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version