Economy ONU: 1 Gigabit Ethernet port only
Quantity
Description
AN-E-ONU1000 is CPE equipment of GEPON OLT with a 1 Autosensing 10/100/1000 Gigabit Ethernet interface only. It is special designed for FTTH (Fiber to the Home) and FTTB (Fiber to the Building), but where tight budget constraints apply, and no other type of ports are needed. ONU (Optical Network Unit) is the user equipment of GEPON. It can end the operation from OLT (Optical Line Terminal) by PON and provide all kinds of broadband services cooperated with OLT. It offers 1 Gigabit full duplex bandwidth to business users and residential users.
EPON ONU AN-E-ONU1000 is mainly designed for FTTH, FTTO application. EPON ONU AN-E-ONU1000 support 1000Base-PX20+ standard with 1:64 maximum optical splitting ratio and 20km distance, and provide 1uplink GE PON port. ONU AN-E-ONU1000 together with OLT could realize flexible network structure and maintenance and provide total FTTx solutions.
Features
-
Support port-based rate limitation and bandwidth control;
-
In compliant with IEEE802.3ah Standard
-
Up to 20KM transmission Distance
-
Support data encryption, group broadcasting, port Vlan separation, etc.
-
Support Dynamic Bandwidth Allocation (DBA)
-
Support ONU auto-discovery/Link detection/remote upgrade of software;
-
Support VLAN division and user separation to avoid broadcast storm;
-
Support power-off alarm function ,easy for link problem detection
-
Support broadcasting storm resistance function
-
Support ACL and SNMP to configure data packet filter flexibly
-
Specialized design for system breakdown prevention to maintain stable system
-
Support software online upgrading EMS network management based on SNMP, convenient for maintenance
Specifications
|
Item
|
Parameter
|
|
|
Interface
|
PON Interface
|
1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric1.25Gbpsupstream/downstream
SC single-mode fiber
split ratio: 1:64
Transmission distance 20KM
|
|
User Ethernet
Interface
|
1*10/100M auto-negotiation (AN-E-ONU100/1000)
1*10/100/1000M auto-negotiation (AN-E-ONU100)
Full/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance
|
|
|
Power Interface
|
12V DC Power supply
|
|
|
Performance Parameters
|
PON
Optical
Parameter
|
Wavelength: Tx 1310nm, Rx1490nm
Tx Optical Power: -1~4dBm
Rx Sensitivity: -27dBm
Saturation Optical Power: -3dBm
Connector Type: SC
Optical Fiber: 9/125ɥm single-mode fiber
|
|
Data Transmission
Parameter
|
PON Throughput: Downstream 950Mbps; Upstream 930Mbps
Ethernet: 100Mbps (AN-E-ONU100/1000), 1000Mbps (AN-E-ONU1000)
Packet Loss Ratio: <1*10E-12
latency: <1.5ms
|
|
|
Business
Capability
|
Layer 2 wire speed switching
Support VLAN TAG/UNTAG，VLAN conversion
Support Port-based speed limitation
Support Priority classification
Support storm control of broadcast
|
|
|
Network Management
|
Management
Mode
|
Support IEEE802.3 QAM, ONU can be remotely managed by OLT
Support Remote management through SNMP and Telnet
Local management
|
|
Management
Function
|
Status monitor, Configuration management, Alarm management,
Log management
|
|
|
Indicator
|
LED Indicator
|
PWR: Power up or down
SYS: System instructions
OPTIN: Optical Link Status
LINK: ONU Registered
LAN: Link Status of Ethernet Interface
|
|
Physical Features
|
Shell
|
Plastic casing
|
|
Power
|
External 12V 0.5A AC/DC power supply adapter
Power consumption: <2W (AN-E-ONU100/1000), <2.3W (AN-E-ONU100)
|
|
|
Physical
Specifications
|
Item Dimension: 110mm(L) x 70mm(W) x 30mm (H)
Item weight: 0.1kg
|
|
|
Environmental
Specifications
|
Operating temperature: 0 to 50 ºC
Storage temperature: -40 to 85 ºC
Operating humidity: 10% to 90% (Non-condensing)
Storage humidity: 10% to 90% (Non-condensing)
|
|
Ordering Information
|
AN-E-ONU1000
|
1 port Gigabit Ethernet ONU, 1 PON uplink, AC or DC power, works together with AN-E-OLT-1
|
