10G Optical-Electrical-Optical Converter (3R REPEATER)
Quantity
Description
AN-M10-10G-XX-M is XFP-XFP or SFP+ to XFP or SFP+ to SFP+ Optical-Electrical-Optical type media converter / repeater for connection between fiber to fiber 10Gbps equipment function as fiber mode converter ,or as fiber repeater for long distance transmission. It is available as standalone unit with separate external power supply, or as plug in card in AN-CH10 chassis.
It’s main applications are such as connection between fiber to fiber or fiber to copper 10Gbps equipment function as fiber mode converter ,or as fiber repeater for long distance transmission or OEO for network backbone(SAN, LAN, MAN). It support SDH/SONET STM-64/OC-192£¬10G fiber channel£¬10G Ethernet etc and can be applied in Telecommunication room, R&D laboratory, Data center or even 1310nm /1550nm/CWDM/DWDM Optical Wavelength Conversion.
Features
-
3R Repeater
-
Support Jumbo Frame
-
Transparent Transport and very low delay
-
Support ITUT prescribed DWDM/CWDM wavelength
-
Support DMI function for SFP+/XFP fiber module
-
Support PRBS31 Pattern Generator and Checker function
-
Support Loopback test function
-
Economic In-band Management function
-
Powerful Network Management function (Web£¬SNMP£¬Console) -used with AN-CH10 chassis
-
Support hot plugging
-
Support 2U Rack (16 slots) and standalone use
-
Full State Led display
-
Easy installation
Specifications
|
Performance Data
|
Technical Indexes
|
|
Equipment function
|
3R Repeater / Extender / Media converter
|
|
Transmission Speed
|
10Gb/s (9.95Gb/s-11.35Gb/s)
|
|
Protocols
|
IEEE802.3ae (10Gbase-R/LRM)
|
|
Access Type
|
10G LAN/ 10G WAN
|
|
Interface Type
|
A Type: SFP+ To/From SFP+
B Type: SFP+ To/From XFP
C Type: XFP To/From XFP
|
|
Transmission Distance
|
SFP+ module: Up to 80Km
XFP module: Up to 80Km
|
|
Maximum Packet
Forwarding Rate
|
14,880,950/S
|
|
Network management
information:
|
• Card type information
• SFP+ or XFP fiber module detection
• SFP+ or XFP fiber module DMI function (Temperature ¡¢ Voltage ¡¢ Optical power)
• Link status detector
• Enable/Disabled Loopback test function
• Enable/Disable PRBS Generator and checker function
• Rate select (10Gbase-Lan or Wan)
• Remote card’s status monitor (only in pairs)
|
|
power requirement
|
Rack-mountable : AC 85 ¡« 220V OR DC -48V
Standalone: AC 220V OR -48V
Power consumption: ≤4W
|
|
Work Environment
|
Operating Temp: 0~ 50 ¡æ
Storage Temp: -10~ 70 ¡æ
Humidity: 5%~90% (non-condensing)
|
|
Dimension
|
Card £º 11.5mm (W) × 78mm (D)
Standalone £º 156mm (W0 × 128mm (D) × 32mm (H)
|
Ordering Information
|
AN-M10-10G-XX-M(A)
|
10G Optical-Electrical-Optical Converter (3R Repeater), A Type: SFP+ To/From SFP+
|
|
AN-M10-10G-XX-M(B)
|
10G Optical-Electrical-Optical Converter (3R Repeater), B Type: SFP+ To/From XFP
|
|
AN-M10-10G-XX-M(C)
|
10G Optical-Electrical-Optical Converter (3R Repeater), C Type: XFP To/From XFP
|
