Fast Ethernet WDM Media Converter
Fast Ethernet WDM Media Converter Unmanaged 10/100/1000 Fast Ethernet & Gigabit Autosensing Media Converters Media Converters AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd
Quantity
Here we have quick demo showing that WDM converters need just one fiber core to establish fully duplex and operational link, thus allowing to save fiber infrastructure costs.

Description


The AN-UM-130SM-20 & AN-UM-150SM-20 converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly.
This converter can be used as a standard alone unit or a slide-in module to fit the 19 converter rack.
 
Adopting WDM technology, AN-UM-130SM-20 & AN-UM-150SM-20 takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.
 
BiDi WDM – Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelenghts.
 
Converters universal – they can work as standalone modules in point to point applications with external power supply modules – or same converter can be used as a plug in module in AN-CH05 14 slot chassis. Such universal design, made by AD-net saves a lot of money and time to your network planning – you no need thing, how much units you need as standalone and how much units you need as plug in modules in chassis – just order same module and decide later.
 
Also, it does not matters, what type of TX/RX are you using at central side or remote side, they will always operate smooth.
 

Features

  • Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX
  • MTU size supported 1600 bytes maximum
  • Supports pure converter mode data forwarding for extreme low latency
  • Built in 128Kb RAM for data buffer
  • Supports modified cut-through frame forwarding for low latency
  • Optional forward fragments
  • 10/100Mbps and full/half duplex automatically configure in TP port
  • Supports end fault function (optional)
  • MDI/MDI-X Auto Negotiation
  • Support EEPROM configuration
  • LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL. 
  • FCC Class A & CE approved  
  • LLR, LFP – Link Loss Return (LLR), Link Failure Pass (LFP) features supported (please mention this when place order or require price, by default this feature is not included)
  • RoHs compliant
  • Only 1 fiber used instead of 2 – WDM BiDi technology
  • Stainless steel parts (value added feature)
  • Standalone, Wallmount or Hotpluggable in 19′ chassis – universal design


Specifications
 

Wavelength: TX1310nm/RX1550nm; TX1550nm/RX1310nm, for high distance TX1490nm/RX1550nm; TX1550nm/RX1490nm
Technical:
BER: <1E-8
Data Buffer: 128Kb
Power temperature variation: 0£®2mw/¡æ
Input Power Range (dBm): 0~-40
Imax: 800mA
Power: 2.5 W
High perfomance ICPLUS IP113C or RTL8306G chipsets based
Fiber cable(m): 8.3/125, 8.7/125, 9/125 or 10/125single-mode, only 1 strand is needed
Maximum distance: 120 km (available ordering options 20/40/60/80/100/120 km)
Input power: IA@+5VDC or 110~260VAC or 48VDC
Dimensions: 95×70×26mm (external power),  95×70×26mm (external power )
Environment:
Relative humidity;5% to 90%
Operating temperature: 0 to 70 degrees
Storage temperature : -20 to 7


 
 



Ordering Information
 

AN-UM-130SM-20
10/100 Base-TX/FX Bridge Converter 20Km SC Connector (TX=1310 nm)
AN-UM-150SM-20
10/100 Base-TX/FX Bridge Converter 20Km SC Connector (TX=1550 nm)
AN-UM-130SM-40
10/100 Base-TX/FX Bridge Converter 40Km SC Connector (TX=1310 nm)
AN-UM 150SM-40
10/100 Base-TX/FX Bridge Converter 40Km SC Connector (TX=1550 nm)
AN-UM130SM-60
10/100 Base-TX/FX Bridge Converter 60Km SC Connector (TX=1310 nm)
AN-UM-150SM-60
10/100 Base-TX/FX Bridge Converter 60Km SC Connector (TX=1550 nm)
AN-UM-130SM-80
10/100 Base-TX/FX Bridge Converter 80Km SC Connector (TX=1310 nm)
AN-UM-150SM-80
10/100 Base-TX/FX Bridge Converter 80Km SC Connector (TX=1550 nm)
AN-UM-130SM-100
10/100 Base-TX/FX Bridge Converter 100Km SC Connector (TX=1490 nm)
AN-UM-150SM-100
10/100 Base-TX/FX Bridge Converter 100Km SC Connector (TX=1550 nm)
AN-UM-130SM-120
10/100 Base-TX/FX Bridge Converter 120Km SC Connector (TX=1490 nm)
AN-UM-150SM-120
10/100 Base-TX/FX Bridge Converter 120Km SC Connector (TX=1550 nm)
 

Additional information


Fast Ethernet 10/100
Any


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version