AN-miniSDH-V
AN-miniSDH-V MiniSDH Systems (63 E1, V.35, ETH) SDH/MSPP Systems AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd
Quantity

Description


AN-MINISDH-V is a compact SDH TM with STM-1 interface. It can connect with any standard STM-1 optical port , connect to the backbone network directly and build point to point network. 4 E1s,2 V.35 ports and 100Base-T Ethernet service can be supplied. We provide several concrete types of AN-miniSDH-V, so you can select the best one according to you requests.
 
AN-MINISDH-V can work as terminal equipment either in the point to point network or in other complicated network topologies inter-working with other MSPP Express products. It is mainly used in access layer network to supply various services such as STM-1,E1,V.35, Ethernet.(Fig 2-1)Typical applications include big client access,3G mobile station connection and etc.. Together with other MSPP Express products, AN-MINISDH-V can provide flexible network building and access capability. In addition, it can independently apply in various special transport networks with mezzo portfolio.
 

Features

  • Standard STM-1 optical ports,1+1 protection supported, dual or single fiber WDM transmission ,different wavelengths and powers can be selected.
  • Standard SDH mapping of various service interfaces.
  • Ethernet mapping adopts GFP/VC-12 virtual concatenated technology according with MSTP criterios.
  • Comply with ITU-T G .703.
  • E1 port has on-line error surveillance and loopbacktest function.
  • Q3 or SNMP£¨10Base-T£©,RS-485 interface.
  • Standard 19 inch 1 unit box.
  • -48V DC or 220V AC or +24V DC power supply.
  • Supply invalidation and loss indication£¬remote AC220V power loss indication for terminal equipment as a plus.
  • Substrate program on-line update supported.

Specifications
 

SDH signal interface
Bit rate£º 155520kbit/s (STM-1£¬G.957, framing G.707)
Line code£º Scrambled NRZ
Optic ports£º1 or 2 optic ports selected

V35 port
Comply with ITU-T V.35/V.36£¬ DCE mode£¬DTE mode£¬N ×64kbps £¨1 £ N £ 32£©

Ethernet data port
Two 100Base-Tx Ethernet ports.
Comply with IEEE 802.3 related suggestions.
10M/100M auto-adapted
The channel rate of Ethernet can be adjusted among 2M to 100M, and the rate can be decided by setting the quantity of VC12(1~46).
Half duplex/full duplex auto-adapted
HP auto-MDIX£¬MDI and MDI-X auto-adapted,connector:RJ45 socket

E1 port
Comply with ITU-T G.703.Bit rate:2048kbit/s ±50ppm£¬code£ºHDB3, 75ohm or 120ohm

Application scenario
 


 
 

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version