4 port High-Speed Ethernet LAN extender
4 port High-Speed Ethernet LAN extender High Speed LAN & Ethernet Over Copper Extenders Interface Converters AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd
Quantity

Description


AN-LAN-EXT-ENH-200-4 4 port Ethernet Extender is 4 port high-speed Ethernet transmission device. It can simultaneous transmit 4 port Ethernet over any 2-wire cable, such as Cat5, coaxial cable, telephone line, power line and so on. The Max transmission distancecan reach 1,000m, and the Max bandwidth can reach 200Mbps.
 
This device contains the Master and Slave Unit, which supports point to point and point to multi-point network transmission. Now it has two type terminals BNC and 2P connector for your choice, which can be directly used with coaxial cable or 2-wire cable. It can greatly simplify the project cabling, applied to expand network system and transmit long distance network device signals.
 

Features

  • Max transmission distance can reach 1,000m.
  • Max physical bandwidth can reach 200Mbps.
  • Built-in switch function, greatly simplify installation.
  • Plug and play, transparent transmission, no adjustment and no need to change the upper software.
  • Low power consumption, communication channel dynamic adjustment and high performance error correction coding technology.

Specifications
 

Category
Description
Power
Available Voltage Range
12VDC±10%
Power Consumption
≤2W / PC
Transmission / Rate
Standard Compliance
IEEE1901, IEEE802.3
Up down Agreement
CSMA/CA
Physical Speed
200Mbps
Encryption Way
128-bit AES Encryption
Reliability
MTBF
£¾30000 hours
Physical Characteristic
Dimensions (L × W × H)
120mm×104mm×28mm
Material
Aluminum
Net Weight
260g/PC
Operating Environment
Working Temperature
-20¡æ¡«60¡æ
Working Humidity
£¼95% Non-condensation

Instructions
 

Cable tips
Telephone Line: Category 3 or above

 
Power Line: RVV, RVS, RVVP, RVB 2×0.5mm2

 
UTP Cable: Category 5 or above

 
Coaxial Cable: RG59 or above
\

 

Accessories Spec


RJ45 port by EIA / TIA568B

 
BNC/2-wire Converter (Optional)

 
Power Adapter by 12VDC/1A, 5mm female power port (Optional)

 

Dimension



Terminals



Installation instructions


Step
Installation Instruction
1
Coaxial cable BNC Terminal(1)
2
Cat5 cable RJ45 Terminal(2)
3
Power Port(3)
4
Power Indicator is always on(4)
5
Line status indicator is always flashing(5)
6
Data exchange status indicator(6)
7
Always off(7)

Network Data Rate


The graph below shows AN-LAN-EXT-ENH-200-4 transmission distance and network data rate. The data differs from the cables types. When you use this device, please choose the suitable cables in line with your demands.

The above data for TCP throughput is the measured data in the actual environment. The maximum physical layer data is 200Mbps. For coaxial cable transmission, performance is more stable, but it also affected by the cable and terminal matching methods. The above tests are all finished in the field test.
 

Installation diagram


Connection 1:
 
When 4 port Ethernet Extender connects Single Channel Ethernet Extender, Single Channel Ethernet Extender as receiver unit.

 

 
Connection 2:
 
When 4 port Ethernet Extender connects 4 port Ethernet Extender, they are both installed at any side, local or remote, can be used.

 
 


Use tips


When you use AN-LAN-EXT-ENH-200-4, please follow the below tips as a reference, in order to reduce the fault in the process of using and the inspection work.
  1. The device supports auto-negotiation allocate master and slave. It also can be set master-slave side and grouped by software. Each group (one point to multi-point communications group) only allows one Master, others are Slaves. Otherwise, the network data won’t be able to transmit.
  2. Signal transmission cable must be the copper cable. Other material cables will cause the decrease of signal transmission quality and distance.
  3. Long distance cable connection must be formal connection methods, such as welding or using connectors.
  4. Coaxial cable, twisted-pair cable, telephone line and power line all can be used to transmit network data signal in projects. A variety of cables arbitrary mixed connection also can reduce the quality of signal.
  5. Please choose matching power supply (12VDC / 1A).
  6. If need to transmit power at the same time, you should install power filter in the front of each device to make sure signal stability
  7. There is no waterproof design for this product, please make sure it is used in dry environment.
  8. If device fails, do not disassemble or repair it by yourself. Please contact us timely.

Ordering Information
 

 
AN-LAN-EXT-ENH-200-4
4-port high-speed Ethernet transmission device Ethernet over any 2-wire cable, such as Cat5, coaxial cable, telephone line, power line.

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version