STM-1 Over IP (Ethernet) 每 SDH Over IP Multiplexer
STM-1 Over IP (Ethernet) 每 SDH Over IP Multiplexer TDM Over IP Equipment Series Interface Converters AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd
Quantity

Description


AN-TDM-IP-STM-1 STM1 over IP converter is a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.
 
State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
 
AN-TDM-IP-STM-1 has 2 power slots, 1 STM-1 slotㄛ1 GE uplink slot and 1 External clock interface slot.
 
STM1 over IP converter AN-TDM-IP-STM-1 can aggregate 63 E1 over IP remote services to 1 STM-1 port. Remote CPEs could be other members in TDM Over IP family such as AN-TDM-IP-16E1, AN-TDM-IP-8E1, AN-TDM-IP-4E1, AN-TDM-IP-E1, AN-TDM-IP-2E1 etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure.
 

Features

  • Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
  • Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port.
  • User-friendly Web server supported for easy setup and maintenance.
  • Support SNMP V1/V2 network management.
  • STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.
  • Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based8021.1P basedMAC based and TOS based).
  • Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning.
  • Ethernet packet size up to 9720byte.
  • Point to point and point to multipoint supported.
  • Local Ethernet port throughput limiting.
  • Software and hardware online upgrade.
  • Power supply redundancy.

Specifications
 

Item
Description
Model
AN-TDM-IP-STM-1
2 PWR slots
1 STM-1 slot
1 Ethernet uplink slot
1 External clock interface
Service card
Ethernet uplink card
5 GE electrical ports and 1 GE optical port
Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x
Speed and duplex auto-negotiation or manual
STM-1 card
2 port
Default SC/PC
Power
Supply
2 power slots
AC 220v power module
AC 110v power module
DC -48v power module
Consumption
≤40W
Working Environment
Temperature
0~ 50°C
Relative Humidity
≤90% (non-condensing)
Dimension
W x H x D (mm):
1U: 440 x 44 x 231 (mm)


Application scenarios:


 
STM1 Over IP
 



 
STM1 Over ETHERNET
 



Ordering Information
 

AN-TDM-IP-STM-1
STM-1 over IP (Ethernet) Multiplexer (SDH over IP), Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version