360 Voice (FXS/FXO) POTS Phone Over Fiber Multiplexer
360 Voice (FXS/FXO) POTS Phone Over Fiber Multiplexer Voice Over Fiber Mux Series Fiber Optical Multiplexers AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd


AN-FM-700 Voice (phones) over Fiber multiplexer is a kind of point-to-point fiber transmission  multiplexer that developed based on special large scale integrated circuits. It is with perfect alarm function and a phone convergence card.It can use 12 piece of 30 channels phones business card simultaneously in the Machine frame.360 channels phones (optional),1~4 E1 and  1~4 100M linear Ethernet ports (optional).it Provide back up power which make sure complete working function, high integration, low consumption, stable performance and convenient usage.


  • Base on IC of independence intellectual property rights.
  • 19′ rack mount modular design.
  • Can control the remote alarm status (Network management function)
  • E1 according to G.703, adopts full digital clock recovery and smooth phase lock technology.
  • Ethernet is 10M/100M£¬full/half duplex adaptive, support VLAN (optional)
  • Ethernet support Auto-MDIX.
  • 1-360 channels phone, support call indication.
  • Support each site puts the number to each other.
  • Audio ports support FXO and FXS£¬FXO connected with switches£¬FXS with users’ phone.
  • Can distinguish the opposite device is shut down or fiber not connected well when testing lost optical signal (Network management function).
  • User can be notified of the temperature and voltage of the local device (Network management function).
  • User can be notified of the temperature and voltage of the remote device , and can set the alarm threshold of the remote devices temperature;(Network management function).
  • Power supply£ºAC220V¡¢DC-48V/DC24V etc.
  • More than 0~120km no relay transmission distance.


Fiber Interface
Wavelength: Single mode 1310nm/1550nm
Multiple mode 850nm/1310nm (optional)
Fiber core NO.: Double core or single core for option(optional)
Sending consumption: -9dBm/-5dBm
Transmitting range: 0-50km/120km(optional)
Receiving sensitivity: ≤-36dBm (BER<10-11)
Optical code£º scrambling NRZ code
Connector£º SC/FC/ST (optional)
E1 interface
Standard: conforms to G.703 standard.
Coding: HDB3
Interface rate: 2.048Mbps±50ppm
Impedance: 75Ω (unbalanced)/120Ω(balanced)
Connector: BNC
Jitter Performance: according to G.742 and G.823
Allowed attenuation£º0~6dBm
A~D: 16*RJ45 port£¬each RJ45 offer 2 channel voice£¬the 16th  RJ45 port is for reserved.
H: DC-48V input power on the real panel of chassis
E: -48V to 5V power converter
F: USB port for upgrade
I: FXO/S voice module
FXO Exchange Port
Ring detecting voltage:       35V
Ring detecting frequency:     17HZ-60HZ
2 line input impedance:       600Ω (hanging off)
Wastage:                   40db
Magnet call phone port
Ring detecting voltage£º 90V
2 line input impedance£º 600Ω£¨hanging off£©
Wastage£º            40 dB
Balance degree£º       70 dB
Power supply
DC power supply£ºDC-48V£¬error range -36V~-72V£»
DC power supply£ºDC-24V£¬error range -18V~-36V£»
AC power supply£ºAC220V±20%£¬50HZ
Operation Condition
Operating temperature£º                    0°C~50°C
Storing temperature£º                -40°C~+70°C
Relative humidity:£º                 95 %
Without disturbance of erosive and solvent gas, raising dust or strong magnetic field.
Power consumption
Machine power consumption£º        ≤55W

Application scenario:


Ordering Information


Modular up to 360 voice over fiber, 1 - 4 E1's, 1 - 4 Ethernet multiplexer


Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version