USB to RS-485 Interface Converter With RJ-45 Port
USB to RS-485 Interface Converter With RJ-45 Port USB to Serial Conveters Industrial Communication Products AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies | Catacomm Corporation Sdn Bhd


The AN-USB-RS485-RJ45 module is a cost-effective way to convert RS485 industrial buses to a USB interface. When connected to a PC USB port the AN-USB-RS485-RJ45 module is automatically detected and is installed as a native COM port which is compatible with any existing serial communication application. Multiple modules can be installed when using USB hubs thus allowing a hassle free configuration of a multi serial system without any IRQ or DMA configuration. They have 600W protect between the USB port and RS485 protects the PC from spikes or possible misconnections in the communication bus.


The AN-USB-RS485-RJ45 converter can be configured for RS485  two-wire (Half Duplex) networks. When operating in two-wire RS485 the data transfer control is automatically done by the converter. Two independent and RS485 networks can be supported by one AN-USB-RS485-RJ45 module thus duplicating possible number of remote devices.

  • Computer interface: USB V1.1 2.0 Plug and Play.
  • Operational system virtual serial port driver.
  • Supports Windows 98/ME/XP/2000/CE, MAC & Linux 2.4.20 or superior.
  • Field Interfaces: RS-485 Half Duplex (dual buses),
  • Automatic flow control for RS485 Half Duplex.
  • Transmission rate: from 300 bps to 1Mbps.
  • Maximum RS-485 cable length : 1200 m
  • Maximum number of devices in the RS485 network: Half Duplex to 32 devices
  • Power: from the USB port.
  • Consumption: <100 mA.
  • RS-485 bus protection: 600W.
  • USB connection: Mini-B connector.150mm cable
  • with the module.
  • RS-485 connector: RJ-45 type accepting
  • ABS enclosure: 67 x 30 x 24 mm(not include cable)
  • Operating environment: 0 to 70°C, 10 to 90% relative humidity, non-condensing.

Wiring Configuration

The RS-485 termination of the Interface is implemented as RJ-45 plug. The pin assignments for the connector can be found in the following table as well as on a sticker applied to the unit.

RS-485 Pinout at RJ-45

PIN# RS-485
1 485+
2 485-

Wiring examples


Ordering Information


USB to RS-485 converter, RJ45 type for RS485 connector

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version