STM-1 Over IP (Ethernet) 每 SDH Over IP Multiplexer
Quantity
Description
AN-TDM-IP-STM-1 STM1 over IP converter is a cost effective solution for the traditional telecom services migrate to the IP packet networking technology, AN-TDM-IP-STM-1 adopts the innovative TDM over IP technology, with IP circuit emulation that supports transportation of 1xSTM-1(63 E1/VC-12) over GE port. The uplink ports and user data ports are IEEE 802.3 compliant, 10/100/1000M auto-sensed Ethernet ports.
State-of-the-art design provides the highest availability with the accurate timing signal and data bit stream reconstruction. Predefined system parameter profiles that according to different application requirement; ultimately simplify the installation process and saving the maintenance cost.
AN-TDM-IP-STM-1 has 2 power slots, 1 STM-1 slotㄛ1 GE uplink slot and 1 External clock interface slot.
STM1 over IP converter AN-TDM-IP-STM-1 can aggregate 63 E1 over IP remote services to 1 STM-1 port. Remote CPEs could be other members in TDM Over IP family such as AN-TDM-IP-16E1, AN-TDM-IP-8E1, AN-TDM-IP-4E1, AN-TDM-IP-E1, AN-TDM-IP-2E1 etc. to run legacy E1 services. Telecom and Enterprise users can save a lot of access and equipment costs and generates new revenue by offering different types of services over their packet-switched infrastructure.
Features
-
Support IETF RFC4553 SAToP protocol, Ethernet encapsulation support IP/UDP.
-
Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, Anyone of 5 GE electrical ports may act as NM port.
-
User-friendly Web server supported for easy setup and maintenance.
-
Support SNMP V1/V2 network management.
-
STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.
-
Ethernet built-in layer 2 switch, support VLAN(port based, 802.1Q based and QinQ based), QoS(port based﹜8021.1P based﹜MAC based and TOS based).
-
Ethernet support IEEE 802.3x, RSTP (802.1w), LLDP, Ethernet ring protection, OAM and MAC address automatic learning.
-
Ethernet packet size up to 9720byte.
-
Point to point and point to multipoint supported.
-
Local Ethernet port throughput limiting.
-
Software and hardware online upgrade.
-
Power supply redundancy.
Specifications
|
Item
|
Description
|
|
|
Model
|
AN-TDM-IP-STM-1
|
2 PWR slots
1 STM-1 slot
1 Ethernet uplink slot
1 External clock interface
|
|
Service card
|
Ethernet uplink card
|
5 GE electrical ports and 1 GE optical port
Comply with IEEE 802.3, 802.1Q, 802.1P, 802.3x
Speed and duplex auto-negotiation or manual
|
|
STM-1 card
|
2 port
Default SC/PC
|
|
|
Power
|
Supply
|
2 power slots
|
|
AC 220v power module
|
||
|
AC 110v power module
|
||
|
DC -48v power module
|
||
|
Consumption
|
≤40W
|
|
|
Working Environment
|
Temperature
|
0~ 50°C
|
|
Relative Humidity
|
≤90% (non-condensing)
|
|
|
Dimension
|
W x H x D (mm):
|
1U: 440 x 44 x 231 (mm)
|
Application scenarios:
STM1 Over IP
STM1 Over ETHERNET
Ordering Information
|
AN-TDM-IP-STM-1
|
STM-1 over IP (Ethernet) Multiplexer (SDH over IP), Provide 5 GE electrical ports and 1 GE optical port, 6 GE ports serve as network uplinks or users ports, STM-1 card has 2 port, support local clock, STM-1 line clock and external clock.
|
